Well plug cavity wall tie FD-LDZ

Cavity Width

80 mm 120 mm 145 mm 170 mm 190 mm 200 mm 220 mm 225 mm 245 mm 250 mm 300 mm

Model

4 x 210 mm 4 x 250 mm 4 x 275 mm 4 x 300 mm 4 x 320 mm 4 x 350 mm 4 x 375 mm 4 x 400 mm 4 x 425 mm 4 x 450 mm

Clear selection

Stainless steel W.-No.: 1.4401, 1.4362

Description

Stainless steel mat. no.: 1.4401, 1.4362

Incl. Nylon dowel with round collar for 8 mm drill hole and impact pipe. The Ø 3 mm wire anchors may be used for shell spacings (spaces between shells) ≤ 100 mm and for wall areas up to a height of 10 m above ground, the Ø 4 mm wire anchors for shell spacings ≤ 250 mm and for wall areas up to a height of 25 m above Terrain.

Installation surface:
Concrete, unperforated solid bricks, solid KS bricks

No bending required due to the shaft at the anchor end.

Z-21.2-1732
H&R GmbH air layer dowel anchor FD-LDZ

Building authority approved by DIBT Berlin.

Z-17.1-822
for cavity spacings up to 200 mm

Z-17.1-1142
for cavity spacings of 200 to 250 mm

SKU	dimensions	cavity spacing up to	PU
01062welle	4 x 210	80 mm	250
01063welle	4 x 250	120 mm	250
01064welle	4 x 275	145 mm	250
01065welle	4 x 300	170 mm	250
01255welle	4 x 320	190 mm	250
01223welle	4 x 350	220 mm	250
01222welle	4 x 375	245 mm	250
01224welle	4 x 400	250 mm	250
01228welle	4 x 425	250 mm	250
01225welle	4 x 450	250 mm	250