For a fast and safe processing. Stainless steel W.-No .: 1.4401, 1.4362, 1.4571, or 1.4404 according to DIN EN 10088-2.
Building-approved by the DIBT Berlin Z-17.1-1198.
Novelty: Installation with the seam upwards, of course approved by the building authorities!
The BRIKKER 90 and the BRIKKER 90 Plus are supplied already angled.
This makes one processing step redundant, meaning unpack and install directly!
With machine pre-angling, installation as approved is assured.
For all common stone mortar combinations. Can be used in thin-bed and normal mortar.
Thanks to the new production method, anchor lengths of up to 500 mm can be manufactured and special problems can be solved! Thus the Brikker adapts already now to the larger shell distances and future requirements of the market.
Replaces the conventional air layer anchor shapes such as: L-shape, universal anchor, Well-L and other flat steel anchors. Can be used at building heights of up to 25 m above ground and a shell distance of up to 250 mm. Due to the adapted end, a simplified application of the insulation is possible. The punctures in the flat area of the anchor enable a secure and firm hold in the mortar bed. The building inspectorate approval is in the approval procedure.
|Article-No.||Model||Dimensions||Cavity width up to||Packaging|
|291320||Brikker90 Plus 320||6,2 x 320||170 mm||250|
|291340||Brikker90 Plus 340||6,2 x 340||200 mm||250|
|291360||Brikker90 Plus 360||6,2 x 360||220 mm||250|
|291380||Brikker90 Plus 380||6,2 x 380||240 mm||250|
|291400||Brikker90 Plus 400||6,2 x 400||250 mm||250|
* At a cavity spacing bigger than 250 mm and smaller than 100 mm, installation in Germany is only possible with the approval of the building authorities in individual cases.
*² The permissible cavity spacing may differ for thin-bed and normal mortar joints in the facing wall. Please note the approval!